Free Postage Australia wide on order $250+
Fast 24 Hour Dispatch from Melbourne Warehouse
Secure Payments via Mastercard, Visa, AfterPay & PayPal
↑↓ ↵ esc
0

354mm Two-Piece Front Brake Kit for S/R Chassis (Kia Stinger Brembo)

Suits: Nissan Silvia S13, S14, S15, Skyline R32 GTS-T, R33 GTS-T, R34 GT with Kia Stinger Brembo 4-piston front calipers (minimum 18" wheels)

Bigger front brakes for your Silvia or Skyline using Kia Stinger Brembo calipers. Rotors, brackets and hardware in one kit.

  • Steps up from 280mm or 296mm to 354mm front rotors
  • Two-piece rotors: arrive assembled, runout tested and balanced
  • Billet T6-6061 adaptor brackets with stainless Heli-Coils
  • Add braided brake lines for your chassis when you order
354mm front two piece rotor kit for s/r chassis with kia stinger brembo calipers
354mm front rotor caliper adaptor bracket for s/r chassis with kia stinger brembo calipers
354mm front rotor caliper adaptor bracket for s/r chassis with kia stinger brembo calipers
RSBREM354-K
★ 4.9 98 reviews

$988.00 AUD

Inclusions

  • 354mm Front Two Piece Rotors In stock GTR3545330 $749.00 AUD
  • 354mm Kia Stinger Brembo Caliper Brackets for S/R Chassis In stock RSBREM354 $239.00 AUD
Brake Lines Optional
Extras

Check your fitment
Overview

Why upgrade

Stock S-chassis and R32 GTS-T front rotors are 280mm, and the R33 GTS-T and R34 GT run 296mm. This kit mounts readily available Kia Stinger 4-piston Brembo calipers over 354mm two-piece rotors for a bigger front brake.

What’s in the kit

  • 354mm front two-piece rotors (pair, GTR3545330). The ring is free to expand and contract as it heats and cools, and the heat-treated T6-7075 aluminium hat is fixed with Conelock nuts and shoulder bolts.
  • 354mm caliper adaptor brackets for Kia Stinger Brembo (pair), machined from T6-6061 billet aluminium, hard anodised, with stainless steel Heli-Coils. M12 bolts and washers included.
  • Optional front braided brake lines for your chassis, selected when you order.

Ready to fit

Two-piece rotors arrive with the hat and ring already bolted together, runout tested and balanced as an assembly. Always check the hat bolts are at 13–15 ft-lb before fitting, as you would with any two-piece rotor. Otherwise, it’s a direct bolt-on.

Will it fit my car?

Front rotor size, stock to upgraded:

Silvia S13, S14, S15 280mm to 354mm
Skyline R32 GTS-T 280mm to 354mm
Skyline R33 GTS-T 296mm to 354mm
Skyline R34 GT 296mm to 354mm

You’ll need a pair of Kia Stinger Brembo front calipers (2018–2025, 44mm pistons, casting 2004420400 or 2004420300) and 18″ wheels or larger. The factory brake lines sit at full extension with this kit, so add the braided lines.

S13: upgrade to the factory S14 / S15 knuckle, 5-stud hub and lower control arm first.

R34 GT: your knuckle needs M12 caliper bolt holes.

The backing plate may need to be modified or removed to clear the larger rotor.

Specifications

Upgrade 280mm or 296mm to 354mm front rotors
Rotor diameter 354mm
Rotor thickness 30mm
Rotor height 53.8mm
PCD 114.3mm
Centre bore 68mm
Rotor hat T6-7075 aluminium, heat treated
Hat hardware Conelock nuts and shoulder bolts
Hat bolt torque 13–15 ft-lb
Bracket material T6-6061 billet aluminium, hard anodised
Thread inserts Stainless steel Heli-Coils
Bracket and caliper bolt torque 58–62 ft-lb
Calipers Kia Stinger Brembo 4-piston, 44mm pistons (not included)
Wheel size 18″ minimum
Position Front

Fitting

Clean any dirt and rust off the hub face first, or the rotor can run out. Check the rotor hat bolts are at 13–15 ft-lb. Bolt the adaptor to the inside of the knuckle with the M12 x 1.25 x 40mm bolts and washers, then fit the rotor and the caliper with the longer M12 bolts. Use Loctite 242 or equivalent on all bolts and torque to 58–62 ft-lb. Full steps are in the RSBREM354 adaptor and brake kit install guide.

We recommend installation by a licensed mechanic.

Pairs with

  • 354mm Rotor Upgrade: Maximum braking torque and heat management.
  • Adaptor Included: Mounts your sourced Stinger Brembo calipers.
  • Two-Piece Design: Significant unsprung weight reduction.
Free AU shipping over $250
In-stock orders dispatched within 24 hours from Melbourne.
2-year warranty
Every part covered against defects from day one. We repair, replace, or refund — your call.
30-day returns
Faulty part? Free return, full refund. Changed your mind? Full store credit, no fees deducted.
Ships worldwide
International shipping available to most countries. Rates calculated at checkout.
In the box

What's Included

  • 2× 354mm front two-piece rotor (assembled)
  • 2× Caliper adaptor bracket (left and right)
  • 1× Bolt kit: 4 x M12 x 1.25 x 40mm, 4 x M12 x 1.25 x 55mm hex bolts, 8 x flat washers
  • 1× Pair of front braided brake lines (if selected)
Community

Customer Installs

354mm front two piece rotor kit for s/r chassis with kia stinger brembo calipers
354mm front two piece rotor kit for s/r chassis with kia stinger brembo calipers
hfm.parts 354mm front two piece rotor kit nissan s13 s14 r32 r33 for kia stinger brembo
Product Information

Will it fit your car?

Find your car in the list below and add it to your garage. Every part page then checks it for you.

Fits 6 vehicles across 2 models
Nissan Silvia3
S13, PS13
Nissan Silvia/240SX S13 SR20DE · SR20DET · KA24E · KA24DE · 1988–1994
1988–1994
S14
Nissan Silvia/200SX/240SX S14 SR20DE · SR20DET · KA24DE · 1993–2000
1993–2000
S15
Nissan Silvia/200SX S15 SR20DE · SR20DET · 1999–2002
1999–2002
Nissan Skyline3
HCR32
Nissan Skyline R32 GTS-T RB20DET · 1989–1993
1989–1993
ECR33
Nissan Skyline R33 GTS-T RB25DET · 1993–1998
1993–1998
ER34, HR34
Nissan Skyline R34 GT RB25DE · RB20DE · 1998–2001
1998–2001

Install Guides

RSBREM354 Adaptor and Brake Kit Install Guide Install Guide PDF
We have only confirmed fitment for the vehicles mentioned under compatibility. If your vehicle is not listed, then we don't know if it fits.
No. You supply a pair of 2018–2025 Kia Stinger front Brembo calipers with 44mm pistons. Check the casting number reads 2004420400 or 2004420300.
Yes. The factory lines sit at full extension with this kit. Add the braided lines for your chassis when you order.
These brackets suit 5-stud hubs. Upgrade to the factory S14 / S15 knuckle, 5-stud hub and lower control arm first.
Yes, as long as your front knuckle has M12 caliper bolt holes.
Fitted correctly, the bracket sits close to the lower control arm. If your car keeps the factory steering lock, there should be no interference. We can't confirm fitment with aftermarket parts that change your steering angle.
Yes. They arrive with the hat and ring already bolted together, runout tested and balanced as an assembly. Always check the hat bolts are at 13–15 ft-lb before fitting, as you would with any two-piece rotor. Otherwise, it's a direct bolt-on.
That's where the rotor was balanced. Material is machined from the outer edge until it's in balance, then runout is checked before it's packed.
18" or larger.
Yes. Keep your aluminium hats and fit replacement two-piece rotor rings. Choose the 354mm R33 GTR version.
This 354mm rotor is unique to HFM.Parts. Replacements are sold here (GTR3545330). To source one locally you need: 354mm diameter, 30mm thick, 53.8mm height, 114.3mm PCD and 68mm centre bore.

Our Story

We weren't always HFM.Parts; we were Holford Motors. Our brand's identity was forged not in an office, but on the local circuits in the high-stress world of competitive drifting. Our ultimate testbed was our Nissan S14 Drift car, driven by champion Luke Fink. Pushing that car to its limits exposed a crucial truth: achieving genuine, repeatable performance meant relying on components that simply weren't available affordably on the market.

The HFM.Parts brand was born

We made the commitment to design and manufacture the uncompromising, high-quality performance parts that we, as competitive racers, demanded ourselves. Every component you see is a solution conceived, tested, and proven by us. When you choose HFM.Parts, you are investing in components engineered by racers, for racers, ensuring your vehicle delivers its maximum performance potential.

Reviews
4.9
out of 5
5 ★
26
4 ★
1
3 ★
0
2 ★
0
1 ★
0
Customer Reviews

Based on 33 verified reviews

  1. Lachlan Reed
    Oct 6, 2024
    HFM.Parts 324mm Front Brake Upgrade Kit, Single or Two-Piece Rotors, for R33 GTS-T / R34 GT Calipers on Nissan Silvia S14, S15 & Skyline R32 GTS-T, R33 GTS-T, R34 GT →
    Bought this conversion kit for my RWD Stagea running 32GTR sumitomo callipers, everything fit perfectly and as it should, very happy with the quality of the items received.
  2. Tom ✓ Verified
    Aug 12, 2024
    HFM.Parts 300mm Rear Brake Upgrade Kit for Nissan Silvia S13, 180SX, Silvia / 200SX S14 & S15 (Rotors & Caliper Adapters) →
    I recently upgraded my Nissan S15 with these brake rotors and caliper adapters, and I am thoroughly impressed with their products and service. The materials used are high-quality, and the fitment and precision of their product was perfect! Originally I just wanted to enhance the aesthetics of the car with bigger brake rotors! But after the install of their front and rear rotor upgrade kits along with fresh brake pads, I noticed a significant improvement in braking power moving from old worn disks to theirs, not to mention better an overall driving experience. The installation instructions provided were clear and easy to follow. Even if you're not a seasoned mechanic like me, you should be able to install these with minimal hassle using their installation video’s! They are great value for money, I highly recommend HFM part’s to anyone looking to upgrade their braking system for better looks and performance!
  3. Blake Morgan ✓ Verified
    Dec 21, 2023
    HFM.Parts 324mm Two-Piece Front Brake Rotors (Pair) for Nissan 350Z Z33 & Skyline V35 →
    We are currently running the 2 piece brake discs on our endurance race car and they are doing a great job. The weight saving, cooling, reduced replacement cost and the look are all great points as to us returning for more. The team at HFM are knowledgeable on there product and are commited to working through the intricacies of racing with us. GREAT JOB!!
  4. Blake Morgan ✓ Verified
    Dec 21, 2023
    HFM.Parts 324mm Two-Piece Front Brake Rotors (Pair) for Nissan 350Z Z33 & Skyline V35 →
    Using the 2 piece rotors on our endurance car and so far the results are good. Huge weight difference, better cooling, cheaper rotor replacement,and the look is just a bonus. The HFM Team are great with there backup service and comitment to working on some of the more intricacies of a race car. GREAT JOB.
  5. Massimiliano Cassoni ✓ Verified
    Aug 22, 2023
    HFM.Parts 326mm Front Brake Package with Wilwood Forged Superlite 120-11133 Calipers for Subaru BRZ ZD8 →
    Fitted these on my 22 brz.. very happy with the results. I cooked my projuct mu pads in 2 session at luddenham. With these I was running consistent laps with absolutely no brake fade. And extremely fast shipping
  6. William Wright
    Jan 18, 2023
    HFM.Parts 354mm Two-Piece Front Brake Rotors (Pair) for Nissan 370Z Z34 with Akebono Calipers →
    Bought these rotors as a replacement for my OEM ones which were warped when I bought the car. After a slight mix-up with a separate distributor (which Dom was more than happy to rectify, no questions asked), I fitted them yesterday. Installation was easy and they fit perfectly. They're noticeable lighter than stock, so much so that I can feel it in the steering of the car. They have very tight tolerances between the caliper and the rotor, and the materials feel beautiful. Clearly an extraordinarily well-made rotor. Bedded in some new pads and the rotors last night and they feel amazing. Look the part too, which is always a plus! Can't wait to try them out in khanacross events and track days later this year, but from the looks of them they'll more than hold up! Can't wait to check out the rear rotors you guys make when they come out! Thanks!
  7. Damien ✓ Verified
    Oct 24, 2022
    HFM.Parts 324mm Front Brake Upgrade Kit, Single or Two-Piece Rotors, for R33 GTS-T / R34 GT Calipers on Nissan Silvia S14, S15 & Skyline R32 GTS-T, R33 GTS-T, R34 GT →
    Easy install works perfectly on my track car
  8. Stuart Jackson ✓ Verified
    Aug 10, 2022
    HFM.Parts 324mm Front Brake Upgrade Kit for Nissan Silvia S13, S14, S15, 180SX & Skyline R32 GTS-T (Rotors + Caliper Brackets, S14 / S15 / R32 GTS-T Calipers) →
    Very nicely made up kit, my only issue was being 2 flat washers short in the sealed bag "no biggy had some spares in my garage" and the pre assembled 2 piece rotors bots not being anywhere close to the recommended torque specs of 13-15 ft lbs so make sure you checked them! Paired this kit with a new set of Project Mu HC800s and have only had time to do the bed in process so far. But everything feels great. Can't wait to see how they go at my next time attack day.
  9. Jay ✓ Verified
    Jun 5, 2022
    HFM.Parts 326mm Front Brake Package with Wilwood Forged Superlite 120-11133 Calipers & Two-Piece Rotors for Toyota 86 ZN6 & Subaru BRZ ZC6 →
    Purchased this brake set because of their price point. Turns out they’re an amazing set of brakes, improved over stock stopping power by miles. 2 piece rotors are also a nice treat for the calipers. The Wilwood calipers looks great and reduced much weight vs stock. Would recommend.
  10. Ben Whitaker ✓ Verified
    Jun 3, 2022
    HFM.Parts 326mm Front Brake Package with Wilwood Forged Superlite 120-11133 Calipers & Two-Piece Rotors for Toyota 86 ZN6 & Subaru BRZ ZC6 →
    Ive been tracking my car for almost 2 years, this kit has seen about 20 track days. Easy to install and even easier to maintain. Before the HFM rotors I was using DBAs that used to warp every 3-4 track days. The two piece rotors have lasted 8 track days so far and have so much more in them. If anyone is thinking about this product, trust me get it. Completely changes the vehicles braking ability, and still to this day never had any brake fade. HFM keep the good quality throughout all their products and looking forward to purchasing more products from them!
  11. Greg Kruse - GK Tech ✓ Verified
    Apr 1, 2022
    HFM.Parts 354mm Two-Piece Front Brake Rotors (Pair) for Nissan 370Z Z34 with Akebono Calipers →
    These rotors had no brake fade with over 500km's of back to back driving during a Grip Day (circuit). Brakes never got a chance to cool down and at the end of the day there was no lip on the rotor. These rotors were fit to a Nissan 370Z with Forza FP3 Brake Pads and Hankook RS4 tyres.
  12. Andrew Clifton ✓ Verified
    Sep 20, 2021
    HFM.Parts 324mm Front Brake Upgrade Kit for Nissan Silvia S13, S14, S15, 180SX & Skyline R32 GTS-T (Rotors + Caliper Brackets, S14 / S15 / R32 GTS-T Calipers) →
    Great quality and fitment, super fast postage. Very happy
  13. Austin Mason ✓ Verified
    Sep 10, 2021
    HFM.Parts 324mm Front Brake Upgrade Kit for Nissan Silvia S13, S14, S15, 180SX & Skyline R32 GTS-T (Rotors + Caliper Brackets, S14 / S15 / R32 GTS-T Calipers) →
    Super stoked with this rotor kit, easy install and braking performance is noticeably better. Plus they look awesome!
  14. Austin Mason ✓ Verified
    Aug 24, 2021
    HFM.Parts 300mm Rear Brake Upgrade Kit for Nissan Silvia S13, 180SX, Silvia / 200SX S14 & S15 (Rotors & Caliper Adapters) →
    Installed these on my s15 and couldn’t be happier, huge upgrade from the standard rotors, they look great and perform even better. Install was pretty straight forward Would definitely recommend
  15. Steve ✓ Verified
    Aug 9, 2021
    HFM.Parts 337mm Rear Brake Upgrade Kit for Nissan Skyline R32 GTR, R32 GTS-T, R33 GTS-T & R34 GTT (Rotors & Caliper Adapters) →
    Compared to the front upgrade, this is an absolute breeze and the front isn't even that much of an issue. I found myself cleaning up the hub and surrounding areas more than I did installing the adaptor - a testament to the ease of the install. Super straightforward install, as simple as the video makes it out to be. Love the look of the slotted design and the size really fills out my wheel. From what I can discern, it has similar braking properties to factory, but the real difference will be under constant braking. Great piece of gear, great work HFM!
  16. Steve ✓ Verified
    Aug 2, 2021
    HFM.Parts 324mm Front Two-Piece Brake Upgrade Kit for Nissan Skyline R32 GTR →
    Opting to keep my 17" wheels, this upgrade was the perfect choice. For a car that endures regular light track work and spirited driving this kit is ideal. The stock brakes are more than capable of pulling up my - and arguably most - 32 GTR, however they suffer and fade from consistent use. These rotors now provide less brake fade due to the larger 2-piece rotor dissipating heat more efficiently and effectively. The unboxing was great, all the parts came clearly separated allowing for an easy install and the rotors came assembled which was superb. The install felt tedious, though this was due to me constantly test-fitting the adaptor as I shaved the knuckle - trying to shave as little as possible. The install video was an excellent guide and helpful with torque settings too! This was a no brainer for my application. The rotors are about 1kg lighter than the stock 296mm equivalent which is 1 less kilogram of unsprung weight either side which is a great improvement. They are also very aesthetically pleasing. Greater braking endurance, reduction in unsprung weight, extremely cost effective compared to going a true BBK. This is an excellent upgrade for anyone wanting to retain the stock caliper but wants to enhance performance. After considering the other options (Evo Brembos, R33/34 and even R35 GTR Brembos and Endless/Project Mu), this came out on top. Great piece of gear HFM, keep up the great work! These brakes fit under R33 GTR Wheels, 17x9 +22 Advan SA3R's and 17x9 +22 Sparco Crimson.
  17. David Robinson ✓ Verified
    Feb 2, 2021
    HFM.Parts 340mm Rear Brake Upgrade Kit for Nissan Skyline R32 / R33 / R34 GTR with R33 GTR Brembo Calipers →
    Every thing fitted perfectly looks cool amazed how they can make for price I paid
  18. Andrew Finn ✓ Verified
    Oct 6, 2020
    HFM.Parts 324mm Front Brake Upgrade Kit, Single or Two-Piece Rotors, for Nissan Skyline R32 GTR & R32 GTS-4 →
    very good and great repsonse times, product feels good
  19. Rodney petrovic ✓ Verified
    Aug 26, 2020
    HFM.Parts 324mm Front Brake Upgrade Kit, Single or Two-Piece Rotors, for R33 GTS-T / R34 GT Calipers on Nissan Silvia S14, S15 & Skyline R32 GTS-T, R33 GTS-T, R34 GT →
    Very good would go through them again
  20. garry stanton ✓ Verified
    Jul 20, 2020
    HFM.Parts 324mm Two-Piece Front Brake Upgrade Kit for R33 GTS-T Calipers on Nissan Silvia S14, S15 & Skyline R33 GTS-T →
    yeah great install havent used them yet but sure they will be great
  21. Dean Simonovic ✓ Verified
    May 13, 2020
    HFM.Parts 300mm Rear Brake Upgrade Kit for Nissan Silvia S13, 180SX, Silvia / 200SX S14 & S15 (Rotors & Caliper Adapters) →
    I did have to grind off a little caliper metal on drivers side only, the cap head bolt interfered with it, not a big deal, I guess there is variance in the stock nissan caliper forgings, once assembled its all been rock solid for the 2 weeks of daily flogging I mean driving the car gets.
  22. Riley McConaughey ✓ Verified
    Apr 29, 2020
    HFM.Parts 324mm Front Brake Upgrade Kit for Nissan Silvia S13, S14, S15, 180SX & Skyline R32 GTS-T (Rotors + Caliper Brackets, S14 / S15 / R32 GTS-T Calipers) →
    Hfm.parts has done it again with their excellent customer service! And quality of product. Thank you
  23. Robert Bell ✓ Verified
    Apr 26, 2020
    HFM.Parts 340mm Rear Brake Upgrade Kit for Nissan Skyline R32 / R33 / R34 GTR with R33 GTR Brembo Calipers →
    N/S, still haven't looked at it yet.
  24. Shaun Ewing ✓ Verified
    Mar 24, 2020
    HFM.Parts 324mm Front Brake Upgrade Kit for Nissan Silvia S13, S14, S15, 180SX & Skyline R32 GTS-T (Rotors + Caliper Brackets, S14 / S15 / R32 GTS-T Calipers) →
    Overall an easy install, everything works great and looks fantastic!
  25. Stephen Henley ✓ Verified
    Dec 24, 2019
    HFM.Parts 324mm Two-Piece Front Brake Upgrade Kit for R33 GTS-T Calipers on Nissan Silvia S14, S15 & Skyline R33 GTS-T →
    Excellent service, fast freight time, will most definitely use again.
  26. sami l. ✓ Verified
    Sep 6, 2019
    HFM.Parts 300mm Rear Brake Rotors (Pair) for Nissan Silvia S13, 180SX, Silvia / 200SX S14 & S15 →
    Very good upgrade choise.
  27. Ibrahim A. ✓ Verified
    Jul 18, 2019
    HFM.Parts 300mm Rear Brake Rotors (Pair) for Nissan Silvia S13, 180SX, Silvia / 200SX S14 & S15 →
    Good soize, 2 seconds stop. Not bhed
Leave a Review
HFM.Parts 354mm Two-Piece Front Brake Kit for Nissan Silvia S13 / S14 / S15 & Skyline R32 GTS-T / R33 GTS-T / R34 GT (Kia Stinger Brembo Calipers)
0 / 500
Tap to rate

Reviews are published after a brief moderation check

Pairs with

Parts other customers fitted with this one, filtered to the same vehicles.

Recommended for you

Other options in this range for the same vehicles.

Modifying vehicles is a specialist task and requires the knowledge and experience of competent individuals to be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every order where available, however, If you would like a copy prior to ordering, you're welcome to contact us

HFM.Parts, an auto parts brand that specialises in Japanese sports car parts with a whole new level of performance and reliability.
Policies
Warranties Privacy Cookies Terms Cookie settings
Help
Returns Distributors FAQs Work @ HFM
For You
My Account Install Guides Contact Us
HFM.Parts manufacture and sell parts for off-road use only, are not street-legal and do not conform to Australian road laws or ADR Laws unless specified otherwise. Learn about our Warranty or read our full Terms & Conditions.
© 2016 - 2026 HFM.Parts. All Rights Reserved.

BrakesRotors to pads

CylindersBrake and clutch

Clutch & Driveline

Braided Clutch Lines

Wheels & Chassis

Forged WheelsWheel SpacersWheel Studs & NutsHub RingsSuspension & Chassis

Engine & Interior

Engine BayInterior & StylingSafetyFire Extinguisher BracketsMerch

Deals & Spares

Scratch & SaveReplacement Parts

More

Install GuidesArticlesOur StoryFAQsSupport
↑↓ ↵ esc