13/16" Big Bore Push-Type Clutch Slave Cylinder
Suits: Nissan Skyline R32 GTR (built before Feb 1993), R32 GTS-T, R33 GTS-T (push-type only)
Lighter pedal with a heavy-duty clutch. A direct swap for the factory push-type slave on RB25 and RB26 gearboxes.
- 13/16″ bore, up from the factory 3/4″
- Adjustable push rod to set fork free play
- Suits heavy-duty and multi-plate clutches
- Push-type gearboxes only. Check your slave before ordering.
$149.00 AUD
Requirements
Why upgrade
Heavy-duty and multi-plate clutches make for a heavy pedal. The 13/16″ bore needs less pressure to move the fork, so the pedal gets lighter with the same clutch.
Adjustable push rod
The factory rod is a fixed length. The HFM rod adjusts, so you can set the free play at the fork and stop the clutch overriding.
Will it fit my car?
It fits the R32 GTR built before February 1993, the R32 GTS-T and the R33 GTS-T. R32 GTRs from February 1993, and all R33 and R34 GTRs, use a pull-type slave, so go for our pull-type version instead. A lot of these cars have been converted over the years, so check the slave on your car against our product images. You can also send us a photo and we’ll confirm.
Specifications
| Bore | 13/16″ (20.6mm), factory 3/4″ |
|---|---|
| Type | Push-type |
| Push rod | Adjustable |
| Suits | Nissan RB push-type gearboxes |
| Warranty | Lifetime, against manufacturing defects |
Fitting
Bolts to the factory mounts and hard line. Bleed the system, then set free play with the adjustable rod. We recommend installation by a licensed mechanic.
Pairs with
The Geomet® coated clutch master cylinder for your car: R32 GTR, R32 GTS-T or R33 GTS-T. Finish it off with a reservoir sweatband.
- Adjustable Push Rod
What's Included
-
1× Big Bore Clutch Slave Cylinder with adjustable push rod
Customer Installs
Will it fit your car?
Find your car in the list below and add it to your garage. Every part page then checks it for you.
Install Guides
Our Story
We weren't always HFM.Parts; we were Holford Motors. Our brand's identity was forged not in an office, but on the local circuits in the high-stress world of competitive drifting. Our ultimate testbed was our Nissan S14 Drift car, driven by champion Luke Fink. Pushing that car to its limits exposed a crucial truth: achieving genuine, repeatable performance meant relying on components that simply weren't available affordably on the market.
The HFM.Parts brand was born
We made the commitment to design and manufacture the uncompromising, high-quality performance parts that we, as competitive racers, demanded ourselves. Every component you see is a solution conceived, tested, and proven by us. When you choose HFM.Parts, you are investing in components engineered by racers, for racers, ensuring your vehicle delivers its maximum performance potential.
Pairs with
Parts other customers fitted with this one, filtered to the same vehicles.
-
Geomet® Coated Clutch Master Cylinder for S14, S15, R33 & R34
Suits: Nissan Silvia / 200SX S14, S15, Skyline R33 GTS-T, R34 GTT (bottom clutch line feed)
$119.00 AUD -
Geomet® Coated Clutch Master Cylinder for GTR
Suits: Nissan Skyline R32 GTR, R33 GTR, R34 GTR, Stagea C34 260RS (RB26DETT)
$139.00 AUD -
337mm V2 Rear Rotors for R32, R33 & R34
Suits: Nissan Skyline R32 GTR, R32 GTS-T, R33 GTS-T, R34 GTT (non-Brembo, with HFM.Parts 337mm adapters, 17" wheels minimum)
$379.00 AUD -
337mm Rear Rotor Caliper Adapters for R32, R33 & R34
Suits: Nissan Skyline R32 GTR, R32 GTS-T, R33 GTS-T, R34 GTT, plus Nissan Silvia S13, 180SX, Silvia / 200SX S14, S15 with an R-chassis rear conversion (non-Brembo)
$209.00 AUD -
BM57 27mm Big Bore RHD Brake Master Cylinder for Skyline, Silvia & 300ZX
Suits: Nissan Skyline R32 GTR, R32 GTS-T, R33 GTR, R33 GTS-T, R34 GT, R34 GTT, Silvia S13, S14, S15, 180SX and 300ZX Z32 (RHD, ABS and non-ABS)
$279.00 AUD -
340mm Rear Rotors for S/R Chassis & GTR
Suits: Nissan Silvia S13, S14, S15, 180SX, Skyline R32 GTS-T, R33 GTS-T, R34 GTT, R32 GTR, R33 GTR, R34 GTR (with HFM.Parts 340mm rear caliper adapters)
$399.00 AUD -
324mm Caliper Adapter Brackets for R33 GTS-T & R34 GT Calipers
Suits: Nissan Skyline R33 GTS-T, R34 GT, plus S14, S15, R32 GTS-T (brackets only, for R33 GTS-T or R34 GT front calipers)
$209.00 AUD -
BM50 1" (25.4mm) Brake Master Cylinder for Skyline, Silvia & 300ZX
Suits: Nissan Skyline R32 GTR, GTS-T, R33 GTR, GTS-T, R34 GT, GTT, Silvia S13, S14, S15, 180SX, 300ZX Z32 (RHD, ABS & Non-ABS)
$279.00 AUD
Recommended for you
Other options in this range for the same vehicles.
-
3/4" Clutch Slave Cylinder for S13, 180SX, S14 & R32
Suits: Nissan Silvia S13, 180SX, Silvia / 200SX S14, Skyline R32 GTS-T
$99.00 AUD -
13/16" Big Bore Pull-Type Clutch Slave Cylinder
Suits: Nissan Skyline R32 GTR (Feb 1993 on), R33 GTR, R34 GTR, R34 GTT, Stagea WGNC34 260RS & RS-Four (pull-type only)
$159.00 AUD
Modifying vehicles is a specialist task and requires the knowledge and experience of competent
individuals to
be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every
order
where
available, however, If you would like a copy prior to ordering, you're welcome to contact us
Based on 28 verified reviews