Front Braided Brake Lines for 354mm Akebono Kit
Suits: Nissan Skyline R34 GTT, R33 GTS-T with the HFM.Parts 354mm Akebono brake kit or adaptor brackets
The extra length your 354mm Akebono brake kit needs, with a firmer pedal than rubber lines.
- Replaces the whole factory flexible brake line
- Made for our 354mm Akebono kit and adaptor brackets
- Made in Melbourne
- Meets FMVSS 106, DOT, TUV and ADR
$259.00 AUD
Requirements
Why upgrade
With our 354mm Akebono brake kit or adaptor brackets fitted, the factory brake lines sit at full extension. These lines replace the whole factory flexible line and give you the extra length the bigger brake needs. Braided lines are stronger than the factory rubber lines, so the pedal feels firmer and less spongy.
Built to the standard
Made in Melbourne and compliant with FMVSS 106, DOT, TUV and ADR. FMVSS 106 testing includes:
- 370lb (168kg) pull test
- 35-hour whip test
- 7000psi burst test
- -45°C to 146°C temperature test
- 24-hour salt corrosion resistance test
Will it fit my car?
These lines are made to suit our 354mm front brake kit for R34 GTT and 354mm caliper adaptor brackets. They are not a replacement for the factory lines on a standard brake setup.
Specifications
| Type | Hard line delete braided brake lines |
|---|---|
| Position | Front |
| Suits | HFM.Parts 354mm Akebono brake kit or adaptor brackets |
| Standards | FMVSS 106, DOT, TUV, ADR |
| Made in | Melbourne, Australia |
Fitting
Fit them in place of the factory flexible lines when you install your 354mm Akebono brakes. The factory hard-line bracket behind the knuckle serves no function once they’re on, so keeping it is up to you. Bleed the brakes fully after fitting.
We recommend installation by a licensed mechanic.
Pairs with
What's Included
-
1× Pair of front hard line delete braided brake lines
Customer Installs
Will it fit your car?
Find your car in the list below and add it to your garage. Every part page then checks it for you.
Our Story
We weren't always HFM.Parts; we were Holford Motors. Our brand's identity was forged not in an office, but on the local circuits in the high-stress world of competitive drifting. Our ultimate testbed was our Nissan S14 Drift car, driven by champion Luke Fink. Pushing that car to its limits exposed a crucial truth: achieving genuine, repeatable performance meant relying on components that simply weren't available affordably on the market.
The HFM.Parts brand was born
We made the commitment to design and manufacture the uncompromising, high-quality performance parts that we, as competitive racers, demanded ourselves. Every component you see is a solution conceived, tested, and proven by us. When you choose HFM.Parts, you are investing in components engineered by racers, for racers, ensuring your vehicle delivers its maximum performance potential.
Complete the kit
This part comes in these kits — everything you need in one order, at a kit price.
-
354mm Two-Piece Front Brake Kit for S/R Chassis (Akebono)
Suits: Nissan Silvia S13, S14, S15, Skyline R32 GTS-T, R33 GTS-T, R34 GT with 370Z Z34 front Akebono or Infiniti G37, Q60, Q70 front calipers (minimum 18" wheels)
$988.00 AUD -
354mm Two-Piece Front Brake Kit for R34 GTT
Suits: Nissan Skyline R34 GTT with 370Z Z34 front Akebono calipers (minimum 18" wheels)
$988.00 AUD
Pairs with
Parts other customers fitted with this one, filtered to the same vehicles.
-
354mm Akebono Caliper Adaptor Brackets for R34 GTT
Suits: Nissan Skyline R34 GTT with 370Z Z34 front Akebono calipers and 354mm rotors (minimum 18" wheels)
$239.00 AUD -
350mm Rear Caliper Adapters for S/R Chassis (370Z Akebono)
Suits: Nissan Silvia S13, S14, S15, 180SX, Skyline R32 GTS-T, R33 GTS-T, R34 GT, R34 GTT, R32 GTR, R33 GTR, R34 GTR running 370Z Akebono or Infiniti G37, Q60, Q70 rear calipers
$209.00 AUD -
337mm Rear Rotor Caliper Adapters for R32, R33 & R34
Suits: Nissan Skyline R32 GTR, R32 GTS-T, R33 GTS-T, R34 GTT, plus Nissan Silvia S13, 180SX, Silvia / 200SX S14, S15 with an R-chassis rear conversion (non-Brembo)
$209.00 AUD -
340mm Rear Rotors for S/R Chassis & GTR
Suits: Nissan Silvia S13, S14, S15, 180SX, Skyline R32 GTS-T, R33 GTS-T, R34 GTT, R32 GTR, R33 GTR, R34 GTR (with HFM.Parts 340mm rear caliper adapters)
$399.00 AUD -
337mm V2 Rear Rotors for R32, R33 & R34
Suits: Nissan Skyline R32 GTR, R32 GTS-T, R33 GTS-T, R34 GTT (non-Brembo, with HFM.Parts 337mm adapters, 17" wheels minimum)
$379.00 AUD
Recommended for you
Other options in this range for the same vehicles.
-
Rear Hard Line Delete Brake Lines for R32, R33, R34
Suits: Nissan Skyline R32 GTR, R32 GTS-T, R33 GTS-T, R34 GTT
$119.00 AUD -
Front Braided Brake Lines for R33 GTS-T & R34 GT/GTT
Suits: Nissan Skyline R33 GTS-T, R34 GT, R34 GTT
$259.00 AUD
Modifying vehicles is a specialist task and requires the knowledge and experience of competent
individuals to
be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every
order
where
available, however, If you would like a copy prior to ordering, you're welcome to contact us
Be the first to review this product. Here's what other customers have been saying about our range:
Recently purchased this item? If you could take a moment to leave us a review, that would be awesome!