324mm Two-Piece Front Brake Kit for R32 GTR
Suits: Nissan Skyline R32 GTR with factory calipers (minimum 17" wheels)
Lighter, bigger front rotors on your factory calipers. Step your R32 GTR up from 296mm to 324mm.
- 324mm two-piece front rotors plus caliper adaptor brackets
- Two-piece: arrives assembled, runout tested and balanced
- Keeps your R32 GTR or R33 GTS-T calipers (not Brembo)
- Needs 17″ wheels and minor knuckle linishing
$608.00 AUD
Inclusions
-
324mm Rotor Caliper Adapter Brackets Suits: R32 GTR & R32 GTST-4
In stock
HFM-NISS-BRK-0007
$209.00 AUD
Requirements
Why upgrade
The R32 GTR runs 296mm front rotors. This kit steps you up to 324mm, 28mm larger, and keeps your factory calipers. It’s an affordable big brake upgrade: more rotor for better heat dissipation and braking, with no new calipers to buy.
What’s in the kit
324mm front rotors (pair). Choose two-piece to save weight, or single-piece.
Single-piece rotors have a clean, slotted face. The slots have a slight curve to help keep the pad surface clean and improve ventilation. The hub is painted black for rust resistance.
Two-piece rotors weigh 7.4kg each, 1.5kg less per corner than our 8.9kg single-piece rotors. The ring is free to expand and contract as it heats and cools, and the centre hat is heat-treated T6-6061 aluminium.
Caliper adaptor brackets (pair). T6-6061 hard anodised billet aluminium with stainless steel Heli-Coils, supplied with M12 caliper bolts. They space your calipers out to suit the larger rotor.
Ready to fit
Single-piece: Every rotor is runout tested and balanced before it leaves us, so it’s a direct bolt-on straight out of the box.
Two-piece: Two-piece rotors arrive with the hat and ring already bolted together, runout tested and balanced as an assembly. Always check the hat bolts are at 13–15 ft-lb before fitting, as you would with any two-piece rotor. Otherwise, it’s a direct bolt-on.
Will it fit my car?
This kit suits the Nissan Skyline R32 GTR with its factory front calipers. The brackets also take R33 GTS-T calipers. They’re designed for factory Nissan calipers only, not Brembo. We can’t confirm fitment with aftermarket calipers. You’ll need 17″ wheels or larger.
Running an R32 GTS-4? See the 324mm front brake upgrade kit for R32 GTR and GTS-4.
Specifications
| Rotor diameter | 324mm (factory 296mm) |
|---|---|
| Rotor thickness | 30mm |
| Minimum thickness | 28mm |
| Rotor height | 53.8mm |
| Centre bore | 68mm |
| Stud holes | 5 |
| Rotor weight | 8.9kg single-piece, 7.4kg two-piece (per rotor) |
| Directional | No, fits either side |
| Calipers | R32 GTR or R33 GTS-T (not Brembo) |
| Bracket material | T6-6061 billet aluminium, hard anodised |
| Bracket threads | Stainless steel Heli-Coils |
| Caliper bolts | M12 hex head, supplied |
| Bracket and caliper bolt torque | 60–70 ft-lb (81–95Nm) |
| Wheel size | 17″ minimum |
| Sold as | Front kit (pair of rotors and pair of brackets) |
Fitting
Remove the rotor and caliper. Linish a small area of the knuckle until the lower bolt hole of the bracket lines up. You may need to trim or remove the backing plate so the larger rotor clears. Mount the bracket on the inside of the knuckle with the two factory hex head bolts, refit the rotor, then bolt the caliper to the bracket with the supplied M12 hex head bolts. Torque all bracket and caliper bolts to 60–70 ft-lb (81–95Nm). Brackets are marked HFMGTR32/LH and HFMGTR32/RH.
With the caliper spaced out, check your brake lines reach without strain. Fit longer lines if they’re at full stretch.
Step-by-step photos are in our R32 GTR adaptor bracket install guide.
Rotors are non-directional, so either rotor can go on either side. On two-piece rotors, check the hat bolts are at 13–15 ft-lb before fitting.
We recommend installation by a licensed mechanic.
Pairs with
DIMENSIONS.
Diameter 324 mm
Height 53.8 mm
Thickness 30 mm
Minimum Thickness 28 mm
Centre Hole 68 mm
Stud Holes 5
Weight 7.4kg/rotor
REPLACEMENTS
We stand by our products. You can purchase replacement HFM.Parts 324mm Rotors without the adapters for a great price, ready when you need them.
ADDITIONAL NOTES.
(Optional) To get the most out of this kit we recommend you replace the standard brake pads with DB1346 or equivalent brake pads.
What's Included
-
2× 324mm front brake rotor (single-piece or two-piece, as selected)
-
2× Caliper adaptor bracket (LH and RH)
-
4× M12 hex head caliper bolt
Customer Installs
Installs of this part — and similar parts in this category.
Will it fit your car?
Find your car in the list below and add it to your garage. Every part page then checks it for you.
Install Guides
Our Story
We weren't always HFM.Parts; we were Holford Motors. Our brand's identity was forged not in an office, but on the local circuits in the high-stress world of competitive drifting. Our ultimate testbed was our Nissan S14 Drift car, driven by champion Luke Fink. Pushing that car to its limits exposed a crucial truth: achieving genuine, repeatable performance meant relying on components that simply weren't available affordably on the market.
The HFM.Parts brand was born
We made the commitment to design and manufacture the uncompromising, high-quality performance parts that we, as competitive racers, demanded ourselves. Every component you see is a solution conceived, tested, and proven by us. When you choose HFM.Parts, you are investing in components engineered by racers, for racers, ensuring your vehicle delivers its maximum performance potential.
Pairs with
Parts other customers fitted with this one, filtered to the same vehicles.
-
340mm Rear Rotors for S/R Chassis & GTR
Suits: Nissan Silvia S13, S14, S15, 180SX, Skyline R32 GTS-T, R33 GTS-T, R34 GTT, R32 GTR, R33 GTR, R34 GTR (with HFM.Parts 340mm rear caliper adapters)
$399.00 AUD -
337mm V2 Rear Rotors for R32, R33 & R34
Suits: Nissan Skyline R32 GTR, R32 GTS-T, R33 GTS-T, R34 GTT (non-Brembo, with HFM.Parts 337mm adapters, 17" wheels minimum)
$379.00 AUD -
337mm Rear Rotor Caliper Adapters for R32, R33 & R34
Suits: Nissan Skyline R32 GTR, R32 GTS-T, R33 GTS-T, R34 GTT, plus Nissan Silvia S13, 180SX, Silvia / 200SX S14, S15 with an R-chassis rear conversion (non-Brembo)
$209.00 AUD -
350mm Rear Caliper Adapters for S/R Chassis (370Z Akebono)
Suits: Nissan Silvia S13, S14, S15, 180SX, Skyline R32 GTS-T, R33 GTS-T, R34 GT, R34 GTT, R32 GTR, R33 GTR, R34 GTR running 370Z Akebono or Infiniti G37, Q60, Q70 rear calipers
$209.00 AUD -
340mm Rear Caliper Adapters for S/R Chassis (350Z Brembo)
Suits: Nissan Silvia S13, S14, S15, 180SX, Skyline R32 GTS-T, R33 GTS-T, R34 GTT, R32 GTR, R33 GTR, R34 GTR running 350Z rear Brembo calipers and HFM.Parts 340mm rear rotors
$225.00 AUD -
Rear Hard Line Delete Brake Lines for R32, R33, R34
Suits: Nissan Skyline R32 GTR, R32 GTS-T, R33 GTS-T, R34 GTT
$119.00 AUD
Recommended for you
Other options in this range for the same vehicles.
-
350mm Two-Piece Rear Brake Kit for S/R Chassis (370Z Akebono)
Suits: Nissan Silvia S13, S14, S15, 180SX, Skyline R32 GTS-T, R33 GTS-T, R34 GT, R34 GTT, R32 GTR, R33 GTR, R34 GTR running 370Z Akebono or Infiniti G37, Q60, Q70 rear calipers
$1,108.00 AUD -
340mm Rear Brake Kit for S/R Chassis (350Z Brembo)
Suits: Nissan Silvia S13, S14, S15, 180SX, Skyline R32 GTS-T, R33 GTS-T, R34 GTT, R32 GTR, R33 GTR, R34 GTR running 350Z rear Brembo calipers
$624.00 AUD -
340mm Rear Brake Kit for GTR (R33 Brembo)
Suits: Nissan Skyline R32 GTR, R33 GTR, R34 GTR (300mm rear) running R33 GTR rear Brembo calipers
$608.00 AUD -
337mm Rear Brake Upgrade Kit for R32, R33 & R34
Suits: Nissan Skyline R32 GTR, R32 GTS-T, R33 GTS-T, R34 GTT (non-Brembo rear calipers, 17" wheels minimum)
$588.00 AUD -
324mm Front Brake Upgrade Kit for R32 GTR
Suits: Nissan Skyline R32 GTR, R32 GTS-4 (with R33 GTS-T calipers), minimum 17" wheels
$608.00 AUD
Modifying vehicles is a specialist task and requires the knowledge and experience of competent
individuals to
be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every
order
where
available, however, If you would like a copy prior to ordering, you're welcome to contact us
Based on 33 verified reviews