5x100 to 5x114.3 Hub Centric Conversion Spacers, 56.1mm Hub
Suits: Toyota 86 ZN6, Subaru BRZ ZC6 and 5x100 Subaru Impreza, WRX, Forester, Legacy, Outback, XV (56.1mm hub)
Run 5×114.3 wheels on your 86, BRZ or 5×100 Subaru. These spacers bolt to your 5×100 hub and give you a 5×114.3 stud pattern with a 56.1mm hub.
- Converts 5×100 PCD to 5×114.3 PCD
- Hub centric: 56.1mm on both sides
- 15mm, 20mm, 25mm and 30mm thicknesses
- 6061-T6 aluminium with 10.9 grade bolts and studs
Price range: $147.00 through $179.00 AUD
We do not accept returns for items not in new, unopened, and unused condition (including test fitment), Learn More
Requirements
What it does
These spacers bolt to your 5×100 hub and carry their own 5×114.3 studs, so you can run 5×114.3 wheels. The wheel side keeps a 56.1mm spigot to centre wheels with a 56.1mm centre bore. They also push the wheel out by the spacer’s thickness.
Will it fit my car?
Check two things:
- Your car: 5×100 PCD with a 56.1mm hub, like the Toyota 86 ZN6, Subaru BRZ ZC6 and 5×100 Subarus.
- Your wheels: 5×114.3 PCD with a 56.1mm centre bore. Wheels with a larger bore can be centred with a hub ring.
Wheels with a 66.1mm centre bore suit the 5×100 to 5×114.3 hub centric conversion spacers (66.1mm hub).
Specifications
| Type | Hub centric, bolt-on conversion |
|---|---|
| Converts | 5×100 PCD to 5×114.3 PCD |
| Hub side (car) | 56.1mm centre bore |
| Wheel side | 56.1mm hub spigot |
| Thickness | 15mm, 20mm, 25mm or 30mm |
| Outside diameter | 150mm |
| Stud thread | M12 x 1.25 |
| Hardware | 10.9 grade bolts and studs |
| Material | 6061-T6 aluminium, hard anodised matte black |
| Torque | 89 ft-lb (120 Nm) |
| Sold as | Pair |
Fitting
The spacer bolts to your hub with the supplied 10.9 grade hardware, then your wheel bolts to the spacer. Check your factory studs don’t stand proud of the spacer face. If they do, trim them so the wheel sits flush.
Torque to 89 ft-lb (120 Nm), the factory setting. Going higher risks stripping the stud from the spacer.
Wheel spacers are sold for off-road use only. We recommend installation by a licensed mechanic.
Pairs with
- open-ended lug nuts (set of 20), M12 x 1.25
- 56.1mm ID aluminium hub rings, to centre wheels with a larger bore
- 5×100 to 5×114.3 hub centric conversion spacers (66.1mm hub)
When installing HFM.Parts Wheel Spacers, we recommend using a square hex socket to ensure a snug fit which will prevent rounding the corners of the nut. Do not use an air ratchet, always tighten the nuts by hand and then torque to 80-86 ft lb’s.
What's Included
-
2× Hub centric conversion wheel spacer, 5x100 to 5x114.3
-
1× 10.9 grade bolts and studs for fitting
Customer Installs
Will it fit your car?
Find your car in the list below and add it to your garage. Every part page then checks it for you.
Our Story
We weren't always HFM.Parts; we were Holford Motors. Our brand's identity was forged not in an office, but on the local circuits in the high-stress world of competitive drifting. Our ultimate testbed was our Nissan S14 Drift car, driven by champion Luke Fink. Pushing that car to its limits exposed a crucial truth: achieving genuine, repeatable performance meant relying on components that simply weren't available affordably on the market.
The HFM.Parts brand was born
We made the commitment to design and manufacture the uncompromising, high-quality performance parts that we, as competitive racers, demanded ourselves. Every component you see is a solution conceived, tested, and proven by us. When you choose HFM.Parts, you are investing in components engineered by racers, for racers, ensuring your vehicle delivers its maximum performance potential.
Recommended for you
Other options in this range for the same vehicles.
-
15mm Hub Centric Wheel Spacers, 5x100, 56.1mm Hub
Suits: Toyota 86 ZN6, Subaru BRZ ZC6 and 5x100 Subaru Impreza, WRX, Forester, Legacy, Outback, XV (56.1mm hub)
$139.00 AUD -
12mm / 15mm Slip-On Wheel Spacers, 5x100 or 5x114.3
Suits: Toyota 86 ZN6, Subaru BRZ ZC6 and Subaru Impreza, WRX, Forester, Legacy, Outback, XV (5x100 or 5x114.3, 56.1mm hub, extended studs required)
Price range: $71.00 through $77.00 AUD -
5x100 to 5x114.3 Hub Centric Conversion Spacers, 66.1mm Hub
Suits: Toyota 86 ZN6, Subaru BRZ ZC6 and 5x100 Subaru Impreza, WRX, Forester, Legacy, Outback, XV (56.1mm hub)
Price range: $147.00 through $184.00 AUD -
3mm / 5mm Slip-On Wheel Spacers, 5x100 or 5x114.3
Suits: Toyota 86 ZN6, GR86 ZN8, Subaru BRZ ZC6, ZD8, Impreza, WRX, WRX STI (5x100 or 5x114.3)
Price range: $52.00 through $57.00 AUD
![multi fit slip on wheel spacers 5x100 or 5x112 pcd 57.1 hub (pair) [discontinued]](https://www.hfm.parts/wp-content/uploads/58/Main-Image-12mm-SO-600x400.jpg)
Modifying vehicles is a specialist task and requires the knowledge and experience of competent
individuals to
be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every
order
where
available, however, If you would like a copy prior to ordering, you're welcome to contact us
Be the first to review this product. Here's what other customers have been saying about our range:
Recently purchased this item? If you could take a moment to leave us a review, that would be awesome!