M6 Socket Head Cap Bolt Kit for Two-Piece Rotors
Suits: HFM.Parts two-piece rotor hats with M6 x 1.0mm socket head cap bolts (older hats)
Fresh hat bolts for older HFM.Parts two-piece rotors. Fit a new set when you change your rotor rings.
- 20 zinc plated socket head cap bolts, M6 x 1.0mm, 12.9 grade
- Cone locks and washers included
- For older M6 hats, not newer shoulder-bolt hats
- Torque to 13–15 ft-lb
$49.00 AUD
Requirements
What it’s for
Older HFM.Parts two-piece rotor hats hold the ring on with M6 x 1.0mm socket head cap bolts. When you change the rings on these hats, fit a new set of bolts. This kit has the bolts, cone locks and washers to do it.
Will it fit?
It suits HFM.Parts two-piece rotor hats that use M6 x 1.0mm socket head cap bolts. Newer hats use M8 x 1.25mm shoulder bolts, which aren’t interchangeable. For those, use the shoulder bolt kit. If you’re not sure, check the bolts in your hats before ordering.
Specifications
| Suits | HFM.Parts two-piece rotor hats that use M6 x 1.0mm socket head cap bolts |
|---|---|
| Bolts | 20 x socket head cap bolts, M6 x 1.0mm, 12.9 grade, zinc plated |
| Also includes | 20 x M6 cone locks, 20 x M6 washers, zinc plated |
| Torque | 13–15 ft-lb |
Fitting
Fit the rotor ring to the hat with the new bolts, cone locks and washers, and torque the bolts to 13–15 ft-lb.
We recommend installation by a licensed mechanic.
Pairs with
- Replacement front rotor rings (no hats)
- Replacement rotor rings and bolts kit (rings with a bolt kit included)
- Shoulder bolt kit (newer M8 x 1.25mm hats)
Torque Wrench Settings: 13-15 ft lbs or 17-20 Nm.
- Start with Fresh Hardware
- High Grade Bolts
- Suit Multiple HFM.Parts Rotors
What's Included
-
20× Zinc plated socket head cap bolt, 12.9 grade (M6 x 1.0mm)
-
20× Zinc plated cone lock (M6)
-
20× Zinc plated washer (M6)
Customer Installs
Installs of this part — and similar parts in this category.
Will it fit your car?
Find your car in the list below and add it to your garage. Every part page then checks it for you.
Our Story
We weren't always HFM.Parts; we were Holford Motors. Our brand's identity was forged not in an office, but on the local circuits in the high-stress world of competitive drifting. Our ultimate testbed was our Nissan S14 Drift car, driven by champion Luke Fink. Pushing that car to its limits exposed a crucial truth: achieving genuine, repeatable performance meant relying on components that simply weren't available affordably on the market.
The HFM.Parts brand was born
We made the commitment to design and manufacture the uncompromising, high-quality performance parts that we, as competitive racers, demanded ourselves. Every component you see is a solution conceived, tested, and proven by us. When you choose HFM.Parts, you are investing in components engineered by racers, for racers, ensuring your vehicle delivers its maximum performance potential.
Recommended for you
Other options in this range for the same vehicles.
Modifying vehicles is a specialist task and requires the knowledge and experience of competent
individuals to
be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every
order
where
available, however, If you would like a copy prior to ordering, you're welcome to contact us
Be the first to review this product. Here's what other customers have been saying about our range:
Recently purchased this item? If you could take a moment to leave us a review, that would be awesome!