Wilwood Caliper Inlet Fitting, NPT to M10
Suits: Wilwood calipers with a 1/8"-27 NPT inlet, including those in HFM.Parts brake kits
Run metric brake lines to Wilwood calipers. Converts the imperial caliper inlet to M10 x 1.0mm.
- 1/8″-27 NPT tapered thread into the caliper
- M10 x 1.0mm female thread for the brake line
- 304 stainless steel
- Included in all HFM.Parts brake kits with Wilwood calipers
$18.00 AUD
Requirements
What it’s for
Wilwood calipers use an imperial 1/8″ NPT inlet. This fitting converts the caliper’s side inlet to M10 x 1.0mm, so you can run metric brake lines. It’s included in all our brake kits with Wilwood calipers.
Will it fit?
It suits Wilwood calipers with a 1/8″-27 NPT inlet. It can also be used in other applications. Check the thread sizes and dimensions in the specifications and the diagram in the product photos.
We recommend installation by a licensed mechanic.
Specifications
| Caliper end | 1/8″-27 NPT tapered male thread |
|---|---|
| Line end | M10 x 1.0mm female thread |
| Material | 304 stainless steel |
| Female section length | 10.30mm |
| Hex height | 5.00mm |
| NPT thread length | 10.00mm |
| Unit of sale | Each |
Pairs with
What's Included
-
1× 1/8"-27 NPT to M10 x 1.0mm brake fitting, 304 stainless steel
Customer Installs
Our Story
We weren't always HFM.Parts; we were Holford Motors. Our brand's identity was forged not in an office, but on the local circuits in the high-stress world of competitive drifting. Our ultimate testbed was our Nissan S14 Drift car, driven by champion Luke Fink. Pushing that car to its limits exposed a crucial truth: achieving genuine, repeatable performance meant relying on components that simply weren't available affordably on the market.
The HFM.Parts brand was born
We made the commitment to design and manufacture the uncompromising, high-quality performance parts that we, as competitive racers, demanded ourselves. Every component you see is a solution conceived, tested, and proven by us. When you choose HFM.Parts, you are investing in components engineered by racers, for racers, ensuring your vehicle delivers its maximum performance potential.
Complete the kit
This part comes in these kits — everything you need in one order, at a kit price.
-
324mm Wilwood Front Brake Kit for 350Z & V35
Suits: Nissan 350Z Z33, Skyline V35, with or without factory Brembo calipers (17" wheels minimum)
$2,253.00 AUD - Save up to 10%
324mm Front Brake Package with Wilwood Calipers for S13, S14, S15
Suits: Nissan Silvia S13, S14, S15 with S14/S15 5-stud hubs and knuckles (17" wheels minimum)
$1,611.00 AUD - Save up to 10%
326mm Front Brake Package with Wilwood Calipers for 86 & BRZ
Suits: Toyota 86 ZN6, Subaru BRZ ZC6 (17" wheels minimum)
$2,158.00 AUD - Save up to 10%
326mm Wilwood Front Brake Package for BRZ ZD8
Suits: Subaru BRZ ZD8 with factory aluminium knuckles (17" wheels minimum)
$2,158.00 AUD
Recommended for you
Other options in this range for the same vehicles.
-
Adjustable Clutch Slave Push Rod (49mm / 52mm)
Suits: HFM.Parts big bore clutch slaves BBCS-RB-AR (49mm) and BBCS-PT (52mm), plus other slaves by size chart
$15.99 AUD -
Bull Nose Extended Wheel Stud (Single) for MX-5 & 124
Suits: Mazda MX-5 NA, NB, NC, ND, Abarth 124 (12.8mm or 14.7mm knurl)
$4.95 AUD -
Bull Nose Extended Wheel Studs for MX-5 & 124
Suits: Mazda MX-5 NA, NB, NC, ND, Abarth 124 (12.8mm or 14.7mm knurl)
$39.95 AUD -
BM57 17/16" (27mm) Brake Master Cylinder Rebuild Kit
Suits: HFM.Parts BM57 brake master cylinder, RHD and LHD (Nissan Skyline, Silvia, 180SX, 240SX and 300ZX Z32)
$99.95 AUD -
Delrin Window Guides for MX-5 NA & NB (Pair)
Suits: Mazda MX-5 NA, NB
$39.00 AUD -
BM57 Brake Master Cylinder Replacement Cap
Suits: HFM.Parts BM57 brake master cylinder, RHD and LHD (Nissan Skyline, Silvia, 180SX, 240SX and 300ZX Z32)
$25.00 AUD -
BullNose Extended Wheel Stud (Single) for 86 & BRZ
Suits: Toyota 86 ZN6, Subaru BRZ ZC6 (front and rear hubs)
$6.95 AUD -
Open-Ended Lug Nut, M12 x 1.25 & 1.5 (Single)
Suits: Nissan Skyline R32, R33, R34, V35, Silvia S13, S14, S15, 180SX, 350Z Z33, Toyota 86 ZN6, Subaru BRZ ZC6 and other M12 x 1.25 or M12 x 1.5 studs (60° taper)
$3.95 AUD
![[spare parts ] open ended lug nuts m12 x 1.25mm suits: subaru brz zc6, toyota 86 zn6](https://www.hfm.parts/wp-content/uploads/48/Spare-Lug-Nut-M125-600x480.jpg)
Modifying vehicles is a specialist task and requires the knowledge and experience of competent
individuals to
be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every
order
where
available, however, If you would like a copy prior to ordering, you're welcome to contact us
Be the first to review this product. Here's what other customers have been saying about our range:
Recently purchased this item? If you could take a moment to leave us a review, that would be awesome!