Adjustable Clutch Slave Push Rod (49mm / 52mm)
Suits: HFM.Parts big bore clutch slaves BBCS-RB-AR (49mm) and BBCS-PT (52mm), plus other slaves by size chart
Set your clutch free play where you want it. An adjustable push rod for our big bore slaves, and for other slaves that match the size chart.
- Adjustable length to set fork free play
- Choose 49mm or 52mm
- Zinc-plated mild steel
- Replacement rod for our big bore clutch slaves
Why adjust
Factory slave push rods are a fixed length. Aftermarket clutches, different pivot ball lengths and thrust bearing carrier lengths all change where free play ends up, so getting it right can be hard. If your clutch is overriding or the pedal feels sloppy, an adjustable rod lets you set the free play at the fork.
Which length do I need?
For a HFM.Parts big bore slave, match the rod to your slave:
| 49mm | 13/16″ big bore push-type clutch slave (BBCS-RB-AR) |
|---|---|
| 52mm | 13/16″ big bore pull-type clutch slave (BBCS-PT) |
For other slaves, check the dimensions in the size charts in the product images and choose the rod that suits your slave.
Specifications
| Type | Adjustable clutch slave push rod |
|---|---|
| Lengths | 49mm or 52mm |
| Material | Zinc-plated mild steel |
| Suits | HFM.Parts BBCS-RB-AR (49mm) and BBCS-PT (52mm), or other slaves by size chart |
| Sold as | Each |
Fitting
Fit the rod to the slave, bleed the system, then set free play with the adjustable rod.
We recommend installation by a licensed mechanic.
Pairs with
- 13/16″ big bore push-type clutch slave for R32 GTR (before Feb 1993), R32 GTS-T and R33 GTS-T
- 13/16″ big bore pull-type clutch slave for R32 GTR (Feb 1993 on), R33 and R34 GTR, R34 GTT and Stagea C34
What's Included
-
1× Adjustable clutch slave push rod (your length)
Customer Installs
Will it fit your car?
Find your car in the list below and add it to your garage. Every part page then checks it for you.
Our Story
We weren't always HFM.Parts; we were Holford Motors. Our brand's identity was forged not in an office, but on the local circuits in the high-stress world of competitive drifting. Our ultimate testbed was our Nissan S14 Drift car, driven by champion Luke Fink. Pushing that car to its limits exposed a crucial truth: achieving genuine, repeatable performance meant relying on components that simply weren't available affordably on the market.
The HFM.Parts brand was born
We made the commitment to design and manufacture the uncompromising, high-quality performance parts that we, as competitive racers, demanded ourselves. Every component you see is a solution conceived, tested, and proven by us. When you choose HFM.Parts, you are investing in components engineered by racers, for racers, ensuring your vehicle delivers its maximum performance potential.
Recommended for you
Other options in this range for the same vehicles.
-
Open-Ended Lug Nut, M12 x 1.25 & 1.5 (Single)
Suits: Nissan Skyline R32, R33, R34, V35, Silvia S13, S14, S15, 180SX, 350Z Z33, Toyota 86 ZN6, Subaru BRZ ZC6 and other M12 x 1.25 or M12 x 1.5 studs (60° taper)
$3.95 AUD -
Replacement 350mm Rear Two-Piece Rotor Rings (No Hats)
Suits: HFM.Parts 350mm two-piece rear rotors for Nissan 370Z Z34 and the S/R chassis 350mm rear brake kit
$409.00 AUD -
Shoulder Bolt (M10 x 1.25 x 30mm)
Suits: HFM.Parts 340mm rear caliper adapter brackets (SR340BREM, SR340BREM-K) and 350mm rear caliper adapter brackets (R34350AKE, R34350AKE-K)
$5.50 AUD -
BM57 17/16" (27mm) Brake Master Cylinder Rebuild Kit
Suits: HFM.Parts BM57 brake master cylinder, RHD and LHD (Nissan Skyline, Silvia, 180SX, 240SX and 300ZX Z32)
$99.95 AUD -
BM57 Brake Master Cylinder Replacement Cap
Suits: HFM.Parts BM57 brake master cylinder, RHD and LHD (Nissan Skyline, Silvia, 180SX, 240SX and 300ZX Z32)
$25.00 AUD -
BM57 Brake Master Grub Screw (M10 x 1.0mm)
Suits: HFM.Parts BM57 brake master cylinder, RHD and LHD (Nissan Skyline, Silvia, 180SX, 240SX and 300ZX Z32)
$3.95 AUD
![[spare parts ] open ended lug nuts m12 x 1.25mm suits: subaru brz zc6, toyota 86 zn6](https://www.hfm.parts/wp-content/uploads/48/Spare-Lug-Nut-M125-600x480.jpg)
Modifying vehicles is a specialist task and requires the knowledge and experience of competent
individuals to
be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every
order
where
available, however, If you would like a copy prior to ordering, you're welcome to contact us
Be the first to review this product. Here's what other customers have been saying about our range:
Recently purchased this item? If you could take a moment to leave us a review, that would be awesome!