Open-Ended Lug Nuts, M12 x 1.25 & 1.5 (Set of 20)
Suits: Nissan Skyline R32, R33, R34, V35, Silvia S13, S14, S15, 180SX, 350Z Z33, Toyota 86 ZN6, Subaru BRZ ZC6 and other M12 x 1.25 or M12 x 1.5 studs (60° taper)
Black open-ended lug nuts that let longer studs pass straight through. The knurled tip gives you grip when locating the stud.
- M12 x 1.25 or M12 x 1.5 thread
- 60° taper seat, 17mm hex
- 48mm long, steel with black E-coating
- Set of 20, enough for four five-stud wheels
![[spare parts ] open ended lug nuts m12 x 1.25mm suits: subaru brz zc6, toyota 86 zn6](https://www.hfm.parts/wp-content/uploads/22/Lug-Nuts-20x-900x720.jpg)
Why open-ended
An open end lets a longer stud pass right through the nut, so you get more thread contact. That makes these a good match for extended studs and wheel spacers.
The knurled tip gives you grip when locating the stud, and the black E-coating protects the steel from corrosion.
Will it fit my car?
Choose the thread that matches your wheel studs: M12 x 1.25 or M12 x 1.5. Your wheels need a 60° taper seat.
Specifications
| Thread | M12 x 1.25mm or M12 x 1.5mm |
|---|---|
| Seat | 60° taper |
| Taper width | 21.8mm |
| Hex size | 17mm |
| Total length | 48mm |
| Hex body length | 22mm |
| Knurled head | 16mm wide, 11mm long |
| Material | Steel |
| Finish | Black E-coating |
| Sold as | Set of 20 |
Fitting
Use a 17mm socket and torque to your car’s factory wheel nut spec.
We recommend installation by a licensed mechanic.
Pairs with
M12 x 1.25mm OR M12 x 1.5mm
48mm Long
60° Taper
17mm Hex Head
Made of Steel
What's Included
-
20× Open-ended lug nut, black E-coated steel (your chosen thread)
Customer Installs
Will it fit your car?
Find your car in the list below and add it to your garage. Every part page then checks it for you.
Our Story
We weren't always HFM.Parts; we were Holford Motors. Our brand's identity was forged not in an office, but on the local circuits in the high-stress world of competitive drifting. Our ultimate testbed was our Nissan S14 Drift car, driven by champion Luke Fink. Pushing that car to its limits exposed a crucial truth: achieving genuine, repeatable performance meant relying on components that simply weren't available affordably on the market.
The HFM.Parts brand was born
We made the commitment to design and manufacture the uncompromising, high-quality performance parts that we, as competitive racers, demanded ourselves. Every component you see is a solution conceived, tested, and proven by us. When you choose HFM.Parts, you are investing in components engineered by racers, for racers, ensuring your vehicle delivers its maximum performance potential.
Complete the kit
This part comes in these kits — everything you need in one order, at a kit price.
- Save up to 50%
18x10" Omori Styled Forged Wheels
Suits: Nissan Skyline R32 GTR, R33 GTR, R34 GTR
$1,999.50 AUD - Save up to 50%
18x9.5" +22 R32 GTR V-Spec Styled Forged Wheels
Suits: Nissan Skyline R32 GTR, GTS-T, R33 GTR, GTS-T, R34 GTR, GTT, V35, Silvia S13, S14, S15, 350Z, 370Z
$1,945.00 AUD - Save up to 50%
18x9" +25 R33 GTR Styled Forged Wheels
Suits: Nissan Skyline R32 GTR, GTS-T, R33 GTR, GTS-T, R34 GTR, GTT, V35, Silvia S13, S14, S15, 180SX, 350Z, 370Z
$1,945.00 AUD - Save up to 50%
18x9" +25 R32 GTR Styled Forged Wheels
Suits: Nissan Skyline R32 GTR, GTS-T, R33 GTR, GTS-T, R34 GTR, GTT, V35, Silvia S13, S14, S15, 180SX, 350Z, 370Z
$1,945.00 AUD
Recommended for you
Other options in this range for the same vehicles.
-
Open-Ended Multi Hex Lock Nut Set
Suits: M12 x 1.25 or M12 x 1.5 studs with a 60° taper seat (universal fit)
$39.95 AUD -
BullNose Extended Wheel Studs for 86 & BRZ
Suits: Toyota 86 ZN6, Subaru BRZ ZC6 (front and rear hubs)
$59.95 AUD
Modifying vehicles is a specialist task and requires the knowledge and experience of competent
individuals to
be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every
order
where
available, however, If you would like a copy prior to ordering, you're welcome to contact us
Based on 2 verified reviews