Open-Ended Lug Nut, M12 x 1.25 & 1.5 (Single)
Suits: Nissan Skyline R32, R33, R34, V35, Silvia S13, S14, S15, 180SX, 350Z Z33, Toyota 86 ZN6, Subaru BRZ ZC6 and other M12 x 1.25 or M12 x 1.5 studs (60° taper)
Lost one? Grab a single to match your set. Open-ended, with a knurled tip for grip when locating the stud.
- M12 x 1.25 or M12 x 1.5 thread
- 60° taper seat, 17mm hex
- 48mm long, steel with black E-coating
- Matches our set of 20
![[spare parts ] open ended lug nuts m12 x 1.25mm suits: subaru brz zc6, toyota 86 zn6](https://www.hfm.parts/wp-content/uploads/48/Spare-Lug-Nut-M125-900x720.jpg)
A spare for your set
Buy as many or as few as you need. It’s the same nut as our open-ended lug nut set of 20, sold singly.
An open end lets a longer stud pass right through, so you get more thread contact. The black E-coating protects the steel from corrosion.
Will it fit my car?
Choose the thread that matches your wheel studs: M12 x 1.25 or M12 x 1.5. Your wheels need a 60° taper seat.
Specifications
| Thread | M12 x 1.25mm or M12 x 1.5mm |
|---|---|
| Seat | 60° taper |
| Taper width | 21.8mm |
| Hex size | 17mm |
| Total length | 48mm |
| Hex body length | 22mm |
| Knurled head | 16mm wide, 11mm long |
| Material | Steel |
| Finish | Black E-coating |
| Sold as | Single nut |
Fitting
Use a 17mm socket and torque to your car’s factory wheel nut spec.
We recommend installation by a licensed mechanic.
Pairs with
M12 x 1.25mm OR M12 x 1.5mm
48mm Long
60° Taper
17mm Hex Head
Made of Steel
What's Included
-
1× Open-ended lug nut, black E-coated steel (your chosen thread)
Customer Installs
Will it fit your car?
Find your car in the list below and add it to your garage. Every part page then checks it for you.
Our Story
We weren't always HFM.Parts; we were Holford Motors. Our brand's identity was forged not in an office, but on the local circuits in the high-stress world of competitive drifting. Our ultimate testbed was our Nissan S14 Drift car, driven by champion Luke Fink. Pushing that car to its limits exposed a crucial truth: achieving genuine, repeatable performance meant relying on components that simply weren't available affordably on the market.
The HFM.Parts brand was born
We made the commitment to design and manufacture the uncompromising, high-quality performance parts that we, as competitive racers, demanded ourselves. Every component you see is a solution conceived, tested, and proven by us. When you choose HFM.Parts, you are investing in components engineered by racers, for racers, ensuring your vehicle delivers its maximum performance potential.
Recommended for you
Other options in this range for the same vehicles.
-
Replacement 350mm Rear Two-Piece Rotor Rings (No Hats)
Suits: HFM.Parts 350mm two-piece rear rotors for Nissan 370Z Z34 and the S/R chassis 350mm rear brake kit
$409.00 AUD -
BM57 17/16" (27mm) Brake Master Cylinder Rebuild Kit
Suits: HFM.Parts BM57 brake master cylinder, RHD and LHD (Nissan Skyline, Silvia, 180SX, 240SX and 300ZX Z32)
$99.95 AUD -
BM57 Brake Master Cylinder Replacement Cap
Suits: HFM.Parts BM57 brake master cylinder, RHD and LHD (Nissan Skyline, Silvia, 180SX, 240SX and 300ZX Z32)
$25.00 AUD -
Adjustable Clutch Slave Push Rod (49mm / 52mm)
Suits: HFM.Parts big bore clutch slaves BBCS-RB-AR (49mm) and BBCS-PT (52mm), plus other slaves by size chart
$15.99 AUD -
Shoulder Bolt (M10 x 1.25 x 30mm)
Suits: HFM.Parts 340mm rear caliper adapter brackets (SR340BREM, SR340BREM-K) and 350mm rear caliper adapter brackets (R34350AKE, R34350AKE-K)
$5.50 AUD -
BM57 Brake Master Grub Screw (M10 x 1.0mm)
Suits: HFM.Parts BM57 brake master cylinder, RHD and LHD (Nissan Skyline, Silvia, 180SX, 240SX and 300ZX Z32)
$3.95 AUD -
BullNose Extended Wheel Stud (Single) for 86 & BRZ
Suits: Toyota 86 ZN6, Subaru BRZ ZC6 (front and rear hubs)
$6.95 AUD -
Brake Master Grub Screw for BMZ33 (350Z)
Suits: HFM.Parts BMZ33 brake master cylinder (Nissan 350Z Z33, Skyline V35 with Brembo)
$3.95 AUD
Modifying vehicles is a specialist task and requires the knowledge and experience of competent
individuals to
be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every
order
where
available, however, If you would like a copy prior to ordering, you're welcome to contact us
Be the first to review this product. Here's what other customers have been saying about our range:
Recently purchased this item? If you could take a moment to leave us a review, that would be awesome!