BM57 Brake Master Reservoir Relocation Kit
Suits: HFM.Parts BM57 brake master cylinder, RHD and LHD (Nissan Skyline, Silvia, 180SX, 240SX and 300ZX Z32)
Put your BM57 reservoir where it suits your engine bay, away from the heat. Built for engine swaps and custom engine bays.
- Two 25cm EPDM hoses you can cut to length
- Billet T6-6061 aluminium fittings and EPDM grommets
- Uses your existing BM57 reservoir
- No bracket, so you choose the mounting spot
$119.00 AUD
Requirements
What it’s for
An engine swap or a custom engine bay can leave the BM57 reservoir sitting in the way, or close to heat. This kit moves the reservoir off the master cylinder and onto a spot of your choosing, connected by two brake fluid resistant EPDM hoses.
Getting the reservoir away from the heat helps stop the fluid heat-soaking.
Will it fit?
The kit is designed for the HFM.Parts BM57, RHD and LHD. It reuses your existing BM57 reservoir. The master cylinder and reservoir are not included.
There’s no bracket in the kit. Every engine bay is different, so you choose where the reservoir goes and how it mounts.
Thinking of using it with another master cylinder or reservoir? Check the hose end and grommet sizes below against your parts.
Specifications
| Suits | HFM.Parts BM57 brake master cylinder (RHD and LHD) |
|---|---|
| Hose length | 25cm each, can be cut shorter |
| Hose material | EPDM, brake fluid resistant |
| Straight hose end | 10mm ID |
| Elbow hose end | 15mm ID |
| Grommet hole size | 20mm |
| Fittings | Billet aluminium (T6-6061) |
| Clamps | E-coated metal |
| Not included | Brake master cylinder, reservoir, mounting bracket |
Fitting
Pick your reservoir mounting spot and bracket first, then cut the hoses to length. Fit the grommets and fittings, and secure each hose with the supplied clamps.
Bleed the brakes once it’s all connected, then check the hoses, clamps and grommets for leaks before driving. Our BM57 install guide covers the master cylinder itself.
We recommend installation by a licensed mechanic.
Pairs with
- BM57 brake master cylinder (RHD)
- BM57 brake master cylinder (LHD)
- Brake master bleeder cap, 75mm x 3mm: one-person bleeding, suits the BM57
- Caliper speed bleeder valve M10 x 1.0mm
Sizing:
Hose Length – 25cm
Grommet Hole Size – 20mm
Straight Hose End – 10mm ID
Elbow Hose End – 15mm ID
- Adjustable Hose Length
- Billet Aluminium Fittings (T6-6061)
- Prevents Heat-Soaking
What's Included
-
2× EPDM hoses (25cm)
-
4× E-coated metal clamps
-
2× EPDM grommets
-
2× Billet aluminium fittings (T6-6061)
Customer Installs
Will it fit your car?
Find your car in the list below and add it to your garage. Every part page then checks it for you.
Our Story
We weren't always HFM.Parts; we were Holford Motors. Our brand's identity was forged not in an office, but on the local circuits in the high-stress world of competitive drifting. Our ultimate testbed was our Nissan S14 Drift car, driven by champion Luke Fink. Pushing that car to its limits exposed a crucial truth: achieving genuine, repeatable performance meant relying on components that simply weren't available affordably on the market.
The HFM.Parts brand was born
We made the commitment to design and manufacture the uncompromising, high-quality performance parts that we, as competitive racers, demanded ourselves. Every component you see is a solution conceived, tested, and proven by us. When you choose HFM.Parts, you are investing in components engineered by racers, for racers, ensuring your vehicle delivers its maximum performance potential.
Pairs with
Parts other customers fitted with this one, filtered to the same vehicles.
-
BM57 27mm Big Bore LHD Brake Master Cylinder for 240SX & 300ZX
Suits: Nissan 240SX S13, S14, 300ZX Z32 (LHD only, 4-piston calipers, ABS & non-ABS)
$279.00 AUD -
BM57 27mm Big Bore RHD Brake Master Cylinder for Skyline, Silvia & 300ZX
Suits: Nissan Skyline R32 GTR, R32 GTS-T, R33 GTR, R33 GTS-T, R34 GT, R34 GTT, Silvia S13, S14, S15, 180SX and 300ZX Z32 (RHD, ABS and non-ABS)
$279.00 AUD -
BM50 1" (25.4mm) Brake Master Cylinder for Skyline, Silvia & 300ZX
Suits: Nissan Skyline R32 GTR, GTS-T, R33 GTR, GTS-T, R34 GT, GTT, Silvia S13, S14, S15, 180SX, 300ZX Z32 (RHD, ABS & Non-ABS)
$279.00 AUD
Recommended for you
Other options in this range for the same vehicles.
-
75mm Pressure Bleeder Cap for BM Series Brake Masters
Suits: BM series brake master cylinders with a 75mm x 3mm reservoir thread (BM44, BM50, BM57), including HFM BM50 and BM57
$25.00 AUD -
Bench Bleeding Line for Brake & Clutch Masters
Suits: brake and clutch master cylinders with M10 x 1.0 or M12 x 1.0 outlets
$25.00 AUD -
M10 x 1.0mm Caliper Speed Bleeder Valve
Suits: calipers with an M10 x 1.0 bleeder thread, including most Akebono, Sumitomo and Brembo calipers
$19.95 AUD -
Brake & Clutch Reservoir Sweatband
Suits: most brake and clutch master cylinder reservoirs (Small 30 x 30mm or Large 60 x 70mm)
$8.00 AUD -
Brake Booster Push Rod Adjusting Tool
Suits: all HFM.Parts brake master cylinders and most brake boosters with an adjustable push rod
$39.00 AUD -
Wilwood Brake Bias Valve 260-12627
Suits: Nissan Skyline R32, R33, R34, Silvia S13, S14, S15, 180SX, 300ZX Z32 and other cars with M10 x 1 bubble-flare lines
$110.00 AUD -
3" Silicone Brake Duct Hose
Suits: Universal fit. Any brake cooling setup running 3" (76mm) duct.
Price range: $79.00 through $149.00 AUD
Modifying vehicles is a specialist task and requires the knowledge and experience of competent
individuals to
be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every
order
where
available, however, If you would like a copy prior to ordering, you're welcome to contact us
Be the first to review this product. Here's what other customers have been saying about our range:
Recently purchased this item? If you could take a moment to leave us a review, that would be awesome!