BM57 Brake Master Grub Screw (M10 x 1.0mm)
Suits: HFM.Parts BM57 brake master cylinder, RHD and LHD (Nissan Skyline, Silvia, 180SX, 240SX and 300ZX Z32)
A spare tapered grub screw to block the unused brake port on ABS cars. Made for the HFM.Parts BM57.
- M10 x 1.0mm thread with a 45° taper
- Blocks the middle port or the rear port closest to the booster
- Suits RHD and LHD BM57 brake master cylinders
- A spare for the one supplied with every BM57
$3.95 AUD
Requirements
What it’s for
On ABS cars, one of the BM57’s brake ports needs to be blocked. This tapered grub screw does that job. Every BM57 comes with one, so this is your spare if it gets lost or you’re setting up a second car.
Will it fit?
It suits the HFM.Parts BM57, RHD and LHD. Non-ABS cars don’t need a port blocked.
Specifications
| Suits | HFM.Parts BM57 brake master cylinder (RHD and LHD) |
|---|---|
| Thread | M10 x 1.0mm |
| Seat | 45° taper |
| Use | Blocks one brake port on ABS cars |
Fitting
Fit the grub screw into either the middle port or the rear port closest to the booster. The two ports are the same, split in two.
After bleeding, check the blocked port for leaks before driving. Our BM57 install guide has the full steps.
We recommend installation by a licensed mechanic.
Pairs with
What's Included
-
1× Tapered grub screw, M10 x 1.0mm (45° taper)
Customer Installs
Will it fit your car?
Find your car in the list below and add it to your garage. Every part page then checks it for you.
Our Story
We weren't always HFM.Parts; we were Holford Motors. Our brand's identity was forged not in an office, but on the local circuits in the high-stress world of competitive drifting. Our ultimate testbed was our Nissan S14 Drift car, driven by champion Luke Fink. Pushing that car to its limits exposed a crucial truth: achieving genuine, repeatable performance meant relying on components that simply weren't available affordably on the market.
The HFM.Parts brand was born
We made the commitment to design and manufacture the uncompromising, high-quality performance parts that we, as competitive racers, demanded ourselves. Every component you see is a solution conceived, tested, and proven by us. When you choose HFM.Parts, you are investing in components engineered by racers, for racers, ensuring your vehicle delivers its maximum performance potential.
Recommended for you
Other options in this range for the same vehicles.
-
BM57 17/16" (27mm) Brake Master Cylinder Rebuild Kit
Suits: HFM.Parts BM57 brake master cylinder, RHD and LHD (Nissan Skyline, Silvia, 180SX, 240SX and 300ZX Z32)
$99.95 AUD -
BM57 Brake Master Cylinder Replacement Cap
Suits: HFM.Parts BM57 brake master cylinder, RHD and LHD (Nissan Skyline, Silvia, 180SX, 240SX and 300ZX Z32)
$25.00 AUD -
Shoulder Bolt (M10 x 1.25 x 30mm)
Suits: HFM.Parts 340mm rear caliper adapter brackets (SR340BREM, SR340BREM-K) and 350mm rear caliper adapter brackets (R34350AKE, R34350AKE-K)
$5.50 AUD -
Open-Ended Lug Nut, M12 x 1.25 & 1.5 (Single)
Suits: Nissan Skyline R32, R33, R34, V35, Silvia S13, S14, S15, 180SX, 350Z Z33, Toyota 86 ZN6, Subaru BRZ ZC6 and other M12 x 1.25 or M12 x 1.5 studs (60° taper)
$3.95 AUD -
Replacement 350mm Rear Two-Piece Rotor Rings (No Hats)
Suits: HFM.Parts 350mm two-piece rear rotors for Nissan 370Z Z34 and the S/R chassis 350mm rear brake kit
$409.00 AUD -
Adjustable Clutch Slave Push Rod (49mm / 52mm)
Suits: HFM.Parts big bore clutch slaves BBCS-RB-AR (49mm) and BBCS-PT (52mm), plus other slaves by size chart
$15.99 AUD
![[spare parts ] open ended lug nuts m12 x 1.25mm suits: subaru brz zc6, toyota 86 zn6](https://www.hfm.parts/wp-content/uploads/48/Spare-Lug-Nut-M125-600x480.jpg)
Modifying vehicles is a specialist task and requires the knowledge and experience of competent
individuals to
be conducted safely.
We recommend this product be installed by a competent person. Instructions are given with every
order
where
available, however, If you would like a copy prior to ordering, you're welcome to contact us
Be the first to review this product. Here's what other customers have been saying about our range:
Recently purchased this item? If you could take a moment to leave us a review, that would be awesome!